WorkeryChamp is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

9 Best 3D Printers under $2000

The biggest benefit of 3D printing is the immediacy of idea implementation that is achieved by a small piece of technology. The part where you get to witness it and play around with it is so exciting.

I know it can be tempting to find the right 3d printer. There are a lot of options and especially if you are buying in this range, you can get more confused with features and all other stuff.

Sit down and create a list of what features you need the most and what features are a bonus. What features you can sacrifice and what features are absolutely necessary?

Spending $2000 on a printer is not a joke. I get it and i am here to help you narrow down your research.

But quite unfortunately, 3D printing or additive manufacturing technology is way too costly for many people to buy and it’s an investment choice they often hesitate to make.

 Finding the right printer for oneself that’s also cost-efficient is too exhausting since there are so many options available in the market.

Let’s check out a list of reviews on best 3D printers under $2000 available in the market today.

Best 3D Printers Under 2000 dollars

Printer NameBest ForWeightPrice
1. MakerGear M2 Desktop Mass Production36.6 pounds
2. Dremel Digilab 3D45Nylon Printing42.8 pounds
3. MakerBot ReplicatorTraining40.3 pounds
4. LulzBot Mini 2Desktop Version26.9 pounds
5. Zortrax M200Compact version44.1 pounds
6. Ultimaker 2 ExtendedOld version1.76 Pounds
7. Dremel Digilab 3D40Taller Objects43.6 pounds
8. JGAURORA 3D Printer A8Mini Version70.5 pounds
9. Dremel Digilab 3D45 EDUBest for Classroom50.0 pounds

One has to carefully assess all those features, jargon, and technical jibber-jabber before making the choice and even then some suffer post-purchase dissonance.

Luckily, we’re here to make your 3D printer search easier in our own little way. 

You don’t need to buy an expensive 3d printer if you don’t need it. There are a lot of cheaper options. Check my best 3d Printer under $300 and 3d Printer under $200 article you can find a pretty decent printer. But of course, expensive ones are more reliable and more feature-rich models.

You can pretty much make your decision based on table above, but if you need extra information and want to dig deeper into each model, keep reading.

1. MakerGear M2 Desktop

Best for mass production of simple objects

MakerGear M2 Desktop 3D Printer
255 Reviews
MakerGear M2 Desktop 3D Printer
  • Large 8" x 10" x 8" Build Envelope
  • Work Out-Of-The-Box With ABS, PLA, PET,...
  • True High-Quality Linear Motion...
  • CNC Machined Precision Hardware On A...
  • Open Design. No Proprietary Filament...
Pros
  • Durable all-metallic construct
  • Good print speed and volume
  • Easy setup and installation
  • Open source firmware
Cons
  • Straight cooling fan
  • Fast print speed
  • Bolts may slip up a bit

Manufactured by a small-scale business in the USA that has been in the printing business since 2009, this desktop 3-D printer offers one of the best printers the 3D printing market has to offer. It allows you to print creative 3D objects from hot extruded plastics.

This printer is the later version of the model M2 which hosted a ton of upgrades in contrast with the previous version and is a 5th generation printer launched by the company. It is particularly targeted towards increasing user-friendliness and performance.

With a four-point bed leveling system and metallic components, this printer comes in a handsomely structured manner.

It is an outstanding example of modern tech being offered at a competitive price tag and can easily become your favorite pastime and spark creativity in your life.

Performance

It is compatible with a bunch of software including commercial, open-source software which can be used to slice, control, and model the print project.

Simplify3D is the recommended software by the company. You can use your Linux, Mac, or Windows to easily control the MakerGear M2 Desktop 3D Printer.

The metallic build-plate can reach a maximum heat of 110 degrees Celsius which helps increase its thermal stability. The hot end, however, reaches a 300 degree Celsius temperature. It may be replaced whenever required.

The heat helps your project to stick to the build plate firmly.

It supports a variety of filaments from ABS to TPU, PLA, and a range of polycarbonate composites. Although it mostly uses open-source firmware, filament and bed-leveling are proprietary for this printer.

MakerGear M2 Desktop 3D Printer offers a really high print speed of up to 200 mm per second, which is partly owed to its large print volume, and the quality it offers is of almost professional cadre.

Portability

MakerGear M2 Desktop 3D Printer weighs about 26.5 pounds and can be considered lightweight. It can easily fit on a standard-sized desktop and does not take too much of your space.

3d Printers are hard to move in general. Because they are heavy. If you are a frequent mover, I’d recommend marking it as a breakable electronic item so your moving company can take care of it.

26 Pound is a lot of weight. Moving this alone can be difficult it would be better to get some help from your friends or family to move it around.

Display

The printer has an innovative design and outstanding features. Precision-machined, carriage ball bearings, size 17 stepper motors, and anodized aluminum axis mounts are just some of the features of this design host.

It has a black powder-coated metallic steel frame and a borosilicate glass print bed that is replaceable and laminable.

The entire construct is a modular design that makes maintenance easy and upgrading easier.

It can be connected with a computer using a USB cable and files can also be shared and printed via an SD card for standalone prints. MakerGear M2 Desktop 3D Printer uses a numerical G-code instruction for the file format.

It sports a RepRap Smart Controller LCD screen which offers all the print control options one might need.

Other Considerations

Durability is definitely a plus for MakerGear M2 Desktop 3D Printer which has a robust metallic body with welded stainless steel borders, aluminum-constructed podium, and strong rectilinear handrails.

The dual V4 extruder kit allows you to extrude two filaments at one time which is good for extended use as one doesn’t have to stop to change the filament frequently.

The kit also contains a comprehensive assembly guide.

Makergear offers a 6-month limited warranty that can be extended in around $300. One can also easily upgrade the printer by purchasing various parts and spares via the company website which allows you to choose from a variety of options.

Customers all around the world have given this printer such high ratings as they are very satisfied by its performance and they feel that the price tag is quite fairly marked.

The printer, however, is best suited for professionals and experienced users and would be somewhat difficult to handle for absolute beginners.

MakerGear M2 Desktop 3D Printer bed is very easy to calibrate and adjust for each project. It can be leveled naturally and stays level after you’re done leveling it. This diminishes the need for any kind of auto-calibration.

The customer support team at Makergear seems to quickly respond to emails and has a user forum for owners to discuss openly regarding their experiences with the printer.

One can also call the company on weekdays or submit a support ticket. Either way, the service and support for this product seem to be good, if not spectacular.

Specs Recap

  • Filament type: ABS, PLA
  • Resolution: 50-300 microns (0.05-0.30 mm)
  • Speed: 80-200 mm per sec
  • Connectivity: USB cable/SD card

2. Dremel Digilab 3D45

Best for nylon printing

Dremel DigiLab Award Winning 3D45-01 3D...
552 Reviews
Dremel DigiLab Award Winning 3D45-01 3D...
  • Pcmag 2018 Editors' Choice Award And...
  • Easily Removable Glass Build Plate...
  • 5-Inch Full Color Touch Screen With...
  • Fully Enclosed Sturdy Plastic Design...
Pros
  • Semi-automatic print bed calibration
  • Filament detection
  • Open-source filaments
  • Sports carbon filtering
Cons
  • Less variety of filament colors
  • Touch screen is not very responsive
  • Standard size filament spools are not supported.

Dremel is a high-end tool manufacturing company with a stellar reputation in 3D printing market.

It first launched into the 3D printing business around 2015 and its primary target market was engineers and professional developers.

It also served the needs of higher education quite well. For a tech-savvy entrepreneur or hobbyist, Digilab 3D45, a 3rd generation fully-enclosed turn-key Dremel 3D printer can be a very alluring choice.

Performance

It supports PLA, ECO-ABS, and nylon filaments offered by the company itself. The PLA filament comes in 11 colors (black, white, translucent white, red, orange, gold, pink, silver, purple, green, and blue).

Although proprietary filaments are recommended, one can also use 3rd party filaments with a couple of quirks and adjustments.

They will require manual temperature input as the printer won’t identify the spools and will need a perfectly sized spool holder that in addition to supporting the spool will allow it to spin freely.

One can adjust, launch, and control the project model via the DigiLab 3D Slicer application which employs the open-source Cura software. This printer can print both G-code and its own .3gdrem file format.

One can use cloud management software to tinker and fix the 3D models in case of potential errors.

Digilab 3D45 offers a speed of 150 millimeters per second which is quite high as compared to several of its counterparts in the industry. The print bed can reach a temperature level of up to 280 degrees Celsius. Its stellar print quality is also very much standing-out.

The printer offers USB, Ethernet, and Wi-Fi connections, and can also support file transfer via a USB flash drive. One can also connect the printer to the Dremel Print Cloud via the web, where you can slice, launch, and monitor your 3D projects, even remotely.

Portability

Digilab 3D45 is quite a large printer weighing about 47 pounds. It measures about 15.9” by 20.2” by 16” in size and would require its own designated desk or table for placement.

Display:

This is a closed-frame construct with an outward-opening plastic door in front and an upward-opening top lid. This gives us easy access to the print area as well as added security during the print process.

The removable print bed is well-built and has a solid glass surface.

Filament spools are placed inside the printer body and are accessible via the side panels. It has a hidden bed calibration sensor that only pops out when you’re about to start a print. It features a built-in carbon filter that takes care of the potential toxic VOCs.

It sports a touch screen user interface that offers all the printer settings from the loading and unloading of filaments to print speed, fan cooling, and temperature inputs. These are all presented in clear icons and in a well-planned layout.

Other Considerations:

Digilab 3D45 also features an HD 720p camera that allows you to check up on your print project in real-time from any remote location where you have access to the internet. It also sends you an email with a picture of the finished product.

The camera also comes in handy for time-lapse videos and you can stop the printing process remotely if you see something out of place.

A brim is also available as a feature that allows added adhesion for the print to the build plate. Another feature allows you to pause the printing and resume it at some other time.

This saves you the trouble of having to restart a print when you run out of filament in the middle of a project. One can also change colors to form a multi-color construct.

The filament detector keeps tabs on the amount of filament left and notifies you when it needs a refill.

The printer has excellent reliability. It can go for up to 400+ hours without any significant problem.

And even when it does surface, there are 3 support media available for the Digilab 3D45 users to ring up .i.e. telephone, email and live chat on the website. They have quite a responsive service

Specs Recap

  • Build volume: 6.7x10x6 (inches)
  • Connections:: USB, Ethernet
  • Display:Touch screen
  • Resolution: 300-50 (microns)

3. MakerBot Replicator

Best for educational and training purposes

Sale
MakerBot Replicator + 3D Printer, with...
106 Reviews
MakerBot Replicator + 3D Printer, with...
  • Your purchase includes One MarkerBot...
  • Item's dimensions – 17.4" W x 20.8" L...
  • Works with MakerBot PLA Material - Large...
  • The only 3D printer tested by NIOSH for...
  • Winner of PC Mag Editor’s Choice...
Pros
  • Sleek design
  • Improved print speed
  • Wi-Fi connectivity
  • Larger build volume
Cons
  • Non-heated build plate
  • Proprietary filaments only
  • Some print glitches

This award-winning 3D printer was launched in 2016 by MakerBot as a personal consumer device but rapidly gained importance in educational, entrepreneurial, and industrial markets.

This 6th generation MakerBot printer has a lot to offer to beginners who are looking to turn 3D printing into a profession. It is good for both learning and professional use.

Performance

Replicator plus is an upgraded version of the older Replicator printer and offers a 30% faster speed than it.

It has also resolved the Replicator’s problems with producing fine details under high-speed settings. It gives a decent quality result and is best in making angled edges with few to no flaws.

The heated filament is extruded and laid down on the build plate in a layer-by-layer fashion.

Each new layer is deposited on top of the previous cooled layer of molten plastic. The printer offers around 30 different shades and finishes.

Replicator plus can be controlled by mobile devices via the MakerBot Print app. It also has a USB port for thumb drives or card readers for standalone printing. Wi-Fi and Ethernet connections are also available so that you can connect to your local networks.

Portability

The Replicator plus weighs about 35.6 pounds. It has a size measurement of 16.2” x 17.4” x 20.8” and would require its own separate workbench or table.

Display

It has a sleek and sturdy metal body with plastic containers and an open construct with little enclosure. The heated build plate has a removable plastic coating that catalyzes adhesion.

Replicator+ features a 3-inch LCD display that can be navigated by a push-button wheel and two other buttons. It also gives the option to preview the finished project before starting the print process.

It can easily be connected to a PC or Mac and controlled via the MakerBot application for iOS and Android.

Portability

At 14.7 x 12.8 inches and 14.7 pounds weight, the Canon Pixma TS8220 is a compact but slightly heavy machine. Unlike its other printers, the design of this device is a bit dated with a clunky exterior.

Despite the boxy design, the printer is easy to move and takes little space

Other Considerations

The setup and installation for Replicator plus are very easy. It basically needs you to have a Wi-Fi or internet connection and download a mobile app on any of your mobile gadgets. The USB and Ethernet connections are used to complete all the necessary setups.

You can also create a MakerBot account that allows you to remotely access the printer. The app is very easy to understand and follow. The printer also features a small webcam for you to remotely witness and monitor the printing process.

This 3D printer uses only proprietary filaments. Filaments are stored at the backside of the printer. The filament loading process is fairly easy but if you use third-party filaments, your warranty can get canceled.

The filament detector is also featured that pauses the print when the filament has run out and notifies users of refill requirements. MakerBot welcomes queries and problems from the Replicator+ users and claims to sort them out at the earliest.

Specs Recap

  • Build Volume: 6.5 x 11.6 x 7.6 (inches)
  • Body:Not enclosed
  • Nozzle Diameter: 0.4 mm (0.015 inches)
  • Filament type:PLA only

4. LulzBot Mini 2

“Compact, Best for designers and cosplayers”

LulzBot Mini 2 Desktop 3D Printer
49 Reviews
LulzBot Mini 2 Desktop 3D Printer
  • Maximum print size: 160 mm x 160 mm x...
  • Tool Head: E3D Titan Aero with . 50mm...
  • Heated print bed: borosilicate glass/pei...
  • Includes 1-year limited with 7-days/week...
  • Certifications: UL, CSA, ETL, FCC, CE,...
Pros
  • USB connectivity
  • Good print speed
  • Open-source
  • Automatic bed calibration
Cons
  • Uses its own edition of Cura
  • Small build area
  • Limited build volume

This particular 3D printer is an upgraded version of the original Mini from Aleph Objects which was launched in 2018. The target market includes architects, engineers, innovators, and designers and hence Mini 2 has a special place in the creative world. It also serves the needs of educators, professionals, and researchers and it is compact and portable and has a modular construction.

Performance

Mini 2 is a small, compact printer with a Cartesian design, a direct drive feeder system, and an E3D Titan Aero tool head. It employs open-source Cura software and also supports Cura OctoPrint, BotQueue, Printrun and Slic3r software.

The print bed can reach a maximum temperature of 300 degrees Celsius when printing. LulzBot’s version of Cura contains pre-configured profiles of a wide variety of materials that you can simply load and print.

The machine uses a single extruder and its motion system is belt-driven which makes it faster and reduces noise level. 

Mini 2 provides an astounding print quality. It only contains a power button and a USB port which you can use to connect the printer to a computer or mobile device in order to operate the printer.

Portability

LulzBot Mini 2 is a compact printer that weighs about 20 pounds and has a frame handle that makes it conveniently portable. As is obvious, you won’t have to worry about space or transport with this 3D printer.

Display

This device is an aluminum metal construct with open source Marlin firmware and open-source printed components. It has a top-mounted spool holder, a USB port, and an in-built power box.

The print head is small and lightweight with a constrained filament passage.

Other Considerations

Mini 2 users are increasing in numbers all over the world due to its ease of use and diversification. They are pleased with the variations of colors and schemes in filaments that it has to offer as it allows them to be more creative with their 3D printing.

 The nozzle has an auto-clean feature so one can use this for an extended period without having to stop for cleaning the nozzle.

It has an automatic bed calibration system, is fully assembled, and basically a just plug-and-play device. It takes just about 30 minutes for initial installation and even less if you are experienced in 3D printing.

 LulzBot has a team of experts available on phone and email on all days of the week and provides its customers with an extensive 12-month warranty.

It has specialized motor drivers that prevent it from making too much noise, hence making it a welcome addition in quieter workplaces or surroundings.

if the power gets accidentally cut off, the printer is configured to lock in place and resume when it comes back on. This prevents print head crashing and project damaging.

LulzBot Mini 2 is one of the best 3D printers under $2000 in the 3D printing market. It is basically a plug-and-print, out of the box machine that can print decent models in amazing colors. It would be best suited for designers, innovators, cosplayers, etc.

Specs Recap

  • Build Volume:160 x 160 x 180 (mm)
  • Nozzle Diameter: 0.50 millimeters
  • Resolution: 50-400 (microns)

5. Zortrax M200

Best Wireless

Zortrax M200 3D Printer with Official...
62 Reviews
Zortrax M200 3D Printer with Official...
  • Includes the top-rated M200 3D printer...
  • Highest-rated plug-and-play desktop 3D...
  • Compatible with PC, Mac, and any 3D...
  • Side covers improve performance and...
  • Build volume = 200 x 200 x 185 mm, Layer...
Pros
  • Simple bed calibration
  • Compatible with open-source filaments
  • Sleep mode saves electricity
Cons
  • Hardware is a little out of date
  • ABS has a propensity to crack
  • Faint odors

M200 is one of the best FDM 3D desktop printers made by Zortrax and is the absolute best for working with ABS-type filaments. It has exceptional quality to offer and produces seamless prints with barely noticeable layering.

I would say it has flawless performance and doesn’t need any additional adjustments on part of the user as Zortrax has had that taken care of.

Performance

M200 has a good printing speed of about 100 millimeters per second and produces exceptional quality, seamless prints.

The slicing software that this printer uses is called Z-Suite which is proprietary and quite essential for preparing files to be printed on Zortrax M200.

This software is not compatible with Linux, only with Mac or PC. The software contains optimal settings for particular types of filaments that the printer uses. It uses proprietary filaments and comes with four spools; a couple of Z-ABS and Z-UlTRATs.

Third-party filaments are also usable but they would require you to go through an extensive trial-and-error crusade to figure out the optimal settings for each type of third-party filament that you use.

The operating temperature for this machine ranges from 60 to 95 degrees Fahrenheit. M200 offers USB, Wi-Fi, and SD card connections.

Portability

An M200 unit weighs about 29 pounds and is not designed to be a portable printer but owing to its fairly lightweight, you wouldn’t have to face too much problem in moving it here and there. It can easily fit atop a standard or small-sized table or desk.

Display & Connectivity

M200 has a distinct, iconic design that has not been copied by many. The metallic frame is coated with black powder and gives a modern look that appeals to the eye. It has a perforated and heated print bed, a single direct drive extruder, and an LCD display.

It has a Cartesian design where X and Y axes are covered by the print head and Z axis by the print bed. It has a unique feature where the printer first lays down a fat raft of plastic onto the print bed as a base that adheres to the perforations and after which the printing process commences.

Other Considerations

M200 has a narrow scope of function as there are little options for the user to tinker with the printer settings.

Most of the adjustments have already been made by Zortrax, so users don’t have to bother with it and also don’t get to play around. There is still a fair amount of settings that are customizable such as splitting a print into two parts.

 It provides particularly exceptional strength and durability with ABS based material filaments. It has a sleep mode, where the machine goes into a low-power sleep state when the print function is over. This saves a lot of electrical costs.

There are a lot of accessories included with this printer such as a power cord, safety gloves and glasses, filament guide and holder, tweezers, SD card reader, nozzle key, the build plate, pliers, spatula and a precision knife. The package also includes four spools of filament; two Z-ABS and two Z-ULTRAT spools.

Bed calibration is almost effortless and is guided via the LCD display control panel. The M200 unit is not assembled and comes in several parts but assembly is a relatively simple process.

Zortrax has a support and help section on its website and has also provided M200 users with a user forum where they can openly discuss issues and experiences.

Zortrax M200 is a reliable machine that produces consistent results and offers you quality dependable results in exchange for the freedom of choice over options. It is best suited for hobbyists or professionals who cannot afford to mess things up.

Specs Recap

  • Build volume: 200 x 200 x 185 (millimeters)
  • Print resolution: 90-400 (microns)

6. Ultimaker 2 Extended

“Best for printing taller objects”

Pros
  • Larger build area and volume
  • Has a heated print bed.
Cons
  • Quality is somewhat inconsistent.

This model of 3D printer is manufactured by Ultimaking Ltd. and is one of the best looking pre-assembled printers in the market.

The core competency of this printer is its largest build volume that allows convenient printing of taller objects of heights up to 12 inches.

Performance

Ultimaker 2 Extended is an upgraded version of Ultimaker 2. It provides a maximum speed of 24 mm³/s and has a broader and taller print area.

It uses its own version of Cura (an open-source software) that is easy to use and can be downloaded for free.

 It offers you various prints settings such as resizing, moving, loading and unloading, etc. It has a monochrome LCD interface coupled with a dial or rotating click wheel to select various options.

The 4GB card that comes with the printer contains some test files and can be entered in the SD card slot to be operated.

 The USB port can be used for firmware updates. There is no Wi-Fi connectivity but the SD card setup along with good software is more than enough.

Portability

The Ultimaker 2 Extended weighs about 26.7 pounds and has a size measurement of 19.2” x 14.1” x 13.5” (HWD). Although it could sit on your desk, you might want a separate table or workbench to place this printer on.

Display

This printer has a sleek, white design and a handsome structure. With an open front and top, white-colored side panels, and LED-lit interior, this machine looks quite captivating.

It has a heated print bed which prevents the print corners from curling up and requires an additional adhesive for proper operation.

Other Considerations

Setting up the Ultimaker 2 Extended is fairly simple. You just add the filament to the spool holder, set the glass plate in place with clips, connect the power supply, turn the printer on, run the Wizard instructions, select any test object from the preloaded files and start printing.

It’s as easy as that. The company provides a 12-month warranty for this printer for usual defects.

Ultimaker 2 Extended is one of the more popular 3D printers that have good detail and quality to offer. It is suitable for printing tall objects, comes pre-assembled, and supports multiple types of filament.

Specs Recap

  • Build Area: 12” x 9” x 8.9” (HWD)
  • Resolution: 100-20 (microns)
  • Printing Area: 223x223x305 (millimeters)

7. Dremel Digilab 3D40

Dremel Digilab 3D40 Award Winning 3D...
114 Reviews
Dremel Digilab 3D40 Award Winning 3D...
  • Dremel Digilab 3D40 Award Winning 3D...
  • 4.5 inch full color touch screen with...
  • Fully enclosed sturdy plastic design...
  • Wifi connectivity and included remote...
  • Dremel's easiest to setup and use PLA 3D...
Pros
  • Expanded build capacity
  • Safety and support
  • Reduced noise
Cons
  • PLA Only
  • Proprietary filament and spool holder

Dremel is a high-end 3D printing company that has many cool models of 3D printers to offer.

It has built a legacy of continuity in both its tool manufacturing and 3D printing businesses. In its crusade to make printers more user-friendly, it launched 3D40 as a more basic version of its 3D45 model.

 It is targeted towards learners and educationists. Schools that have 3D printing as a part of their curriculum might find this device very helpful.

Performance

Digilab 3D40 uses proprietary technology and is contrived to print optimally high-quality models.

It uses eco-friendly PLA manufactured by Dremel itself for safe use in natural settings. It uses the Cura platform which is quite user-friendly and allows more control over printing options.

Filaments are available in 11 colors .i.e. black, white, pink, orange, red, blue, green, silver, purple, gold, and translucent white. Ethernet USB and Wi-Fi connections are available. A USB flash drive can also be used to transfer files.

Portability

Digilab 3D40 weighs about 44 pounds and measures 20.3 x 15.9 x 16 inches. So it’s quite bulky and will occupy some extra space in your classroom or home and is not particularly very portable.

Display & Connectivity

It has a fully enclosed body as a safety feature, a touch screen interface for responsive controls, and an optimized motion system for reduced noise.

It has a sleek, silver-and-blue frame with transparent panels for users to witness the printing process.

There is an air vent at the backside and indentations near the bottom edges for handling the printer to transport.

There is a prominent 4.5-inch touch screen at the front of the printer that is used for various functions such as loading and unloading filament, printing without a computer, and for setup and connections.

Other Considerations

Following accessories are included with the Digilab 3D40:

  • USB Flash Drive and a USB cable
  • Nozzle unclogger and scraper
  • A filament spool
  • User guide and quick start guide
  • A power cord
  • extra build plates
  • Build tapes
  • 30 lesson plans (both basic and advanced)
  • Slicing software
  • 1-year warranty
  • World-class customer support

Installing and printing with the Digilab 3D40 is extremely easy. It just takes about 15 minutes. Also, the printer comes with a full year warranty and excellent customer support.

Specs Recap

  • Build Volume: 10 x 6.0 x 6.7 (inches)
  • Filament Type: PLA
  • Build Plate Material: Glass
  • Build Plate Leveling: Semi-Automated
  • Resolution:100 (microns)

8. JGAURORA 3D Printer A8

Large 3D Printer, JGAURORA 3D Printers...
14 Reviews
Large 3D Printer, JGAURORA 3D Printers...
  • Reliable Material : Commercial grade 3d...
  • Large building size :13.78x9.8x11.8in...
  • Clean and neat structure :Fully closed...
  • Easy Filament Feeding :Dual feeding...
  • HBG glass heating bed tigh adhesion easy...
Pros
  • Blue tape
  • Nuts, screws and Hex Wrench Kit
  • Testing filament
Cons
  • Reliable material
  • Easy filament feeding
  • HBG glass, removable heating bed

JGAURORA A8 is a commercial grade 3d printer that is well-acknowledged for its high speed and extreme precision.

Performance

JGAURORA A8 is an FFF, FDM type extrusion 3D printer. It uses a power input of 220W Alternating Current. For smoother printing, it employs a double motor double-feed feature and has drag chains for cable rooting

It offers a maximum print speed of up to 200 millimeters per second.

Both USB and SD card connection options are available. The printer can be connected to a Mac, Windows, or Linux based computer via a USB cord. It reads G-Code, STL, and OBJ file formats.

Portability

JGAURORA A8 weighs a hefty 32 kilograms and has the size dimensions of 630 × 613 × 450 millimeters. It will definitely need a desk of its own.

Display

It has a fully enclosed body with a dual extruder system and a heated print bed both of which allow for the excellent print quality that it offers. It has an LCD display screen for a control panel that contains a wide variety of options for users to choose from.

Other Considerations:

Following accessories come along with the JGAURORA A8 3D printer:
it comes with a spool holder which is pretty handy for heavy-duty printing.

You probably know, 3d printer is a high tech mechanical product and you might need small maintenance work if you keep it long term. This model has built-in nuts, skews, and hex wrench kit almost anybody with small technical know-how can fix minor issues.

When you think something might go wrong it does. This is the reason why you need testing beforehand. If you don’t test, you end up wasting your ink and printing material which is costly. This model has a built-in testing filament that can be used to test before setting it up for big job.

These are pretty basic and important features for a 3d printer in this range but you must have a baseline knowledge to compare other models.

JGAURORA is one of the best 3D printers under $2000 in the 3D printing market. Its efficiency and high speed make it stand out among all its counterparts

Specs Recap

  • Build volume: 350x250x300 (millimetres)
  • Layer thickness: 0.05-0.4mm
  • Nozzle diameter:0.4mm

9. Dremel Digilab 3D45 EDU

Dremel DigiLab Award Winning 3D45-EDU 3D...
65 Reviews
Dremel DigiLab Award Winning 3D45-EDU 3D...
  • Includes the Dremel 3D45 printer,...
  • Start using the 3D45 right out of the...
  • Teach students to solve open-ended...
  • Introduce your students to the world of...
  • Receive 4 hours of professional...
Pros
  • Very large build volume
  • Print bed heats up very fast
  • Iconic design
Cons
  • A bit glitchy
  • Has no Cura profile

CR-10 MAX is last on our list of best 3D printers under $2000. It is a large volume Cartesian printer from Creality.

It is targeted to hobbyists who like to print large 3D models, sculptures, figurines and decorations etc. It sports upgraded parts and fancier features than the previous models Creality has launched. 

Performance

It has a maximum speed of about 100 millimeters per second and produces good quality, large prints.

It has been particularly optimized for printing Polylactic Acid (PLA) filaments, but will also print PETG, Carbon PET, WOOD, metal composites, and many other materials that don’t require a 100 degree Celsius bed temperature.

 SD card and USB connections are available. It has a large color touch screen display where you can choose files and control prints.

Portability

CR-10 MAX weighs a hefty 10.3 kg and has size dimensions of 300 x 300 x 400 millimeters. It will take a lot of space in your workplace.

Display

CR-10 MAX has a feature-packed, incredible design. A reinforced frame that features a golden triangle construct with pull-rods that minimizes vibrations while printing.

It has a sliding build platform and dual belt motion to reduce noise and bed wobbles. It can heat up to 80 degrees Celsius in just a 3 minutes time span.

Other Considerations:

CR-10 MAX isn’t fully assembled, as it requires some assembly before you can get started with printing in it.

Mostly, it’s just a few screws that need to be fastened here and there and electrical connections are sorted out. The process is easy but a little time-consuming.

Before buying this Creality CR-10 MAX 3D printer you will have to assess for yourself how frequently you want to print this big and if you are ok with the additional costs of filament and energy that come with such a colossal printer.

Specs Recap

  • Build volume: 350x250x300 (millimetres)
  • Layer thickness: 0.05-0.4mm
  • Nozzle diameter:0.4mm

Conclusion:

3D printing technology is all the buzz nowadays. It is no more a future fiction. It is being used by almost all the industries, from auto manufacturers to mobile devices, from medical products and pharmaceuticals to jewelry.

 But it is getting particularly popular in consumer circles. People love to create 3D objects in real-time. They want to purchase consumer 3D printers for homes, offices, schools, and businesses.

 While buying a 3D printer seems pretty exciting, it can really be a hectic business.

There are a lot of manufacturers and products and models out there that you have to choose from.

Our top ten choices for best 3D printers under $2000 is an attempt at helping people out in making this decision. What printer did you like the best and really considered to buy while reading this article? Do let us know!

I fell in love with printing ever since my dad bought the very first printer way back in the early 2000s. It's crazy how things have changed over the years. But I keep track of whatever happens in this industry, and I've set up this blog to share my insights with you all.